Translation assignments and outsourcing

Eugene Kuchynski — Tue, 24 May 2022 06:27:28 GMT

Current Revision posted to Wiki by Eugene Kuchynski on 5/24/2022 6:27:28 AM

Overview

This document allows to register assignments on the base of incoming jobs. When created, corresponding transactions are created in the Ledger (correspond to expenses for the amount of the job according translator’s rates) and in the Balance sheet (i.e. increasing of the debt).

Assignment is created over single translation job, and each assignment task MUST use one of base job's tasks as a base. Value in Quantity column deducts available quantity for assignment from a base job's task.

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

This button provides two choices: One assignment for all unassigned tasks (this option is used by default when you click explicitly on a button icon, not on drop-down button) or Separate assignment per each unassigned task (for example, if a job contains multiple translation tasks, proofreading and review tasks, then the system will create three assignments - one per each work type).

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

The list of Assignment tasks will be automatically filled based on a job's list list of tasks. Since each job task can be assigned to different vendors, by default the system will put currently unassigned quantity to the Quantity column. If you split some task between different vendors, decrease a number in the Quantity column.

Select a value in the Vendor field. When a collaborator is selected, the system will offer to automatically detect rates in each row of the tasks table. When information from base job is read, all prices in this table are automatically set to zero. If you change any prices manually in the tasks table, you can always use Re-detect prices button to load default prices of the currently selected vendor.

In the Vendor field, in addition to drop-down button for quick selection of vendors, you can use a button with search icon (), which allows to open popup window to select a vendor. Advantage of this window is that it contains additional live filters on the right panel, results of the recommendation mechanism, as well as list of recent assignments for a selected vendor at the bottom. This all gives more flexibility and visibility while choosing a vendor for a project.

Take a note that list of vendors in the drop-down list of the Vendor field will not include vendors with employment status other than Employed.

Take a note that the selection list won't show vendors marked as Archived. The Archive status of vendors can be changed from a list of vendors.

When SDL Trados Business Manager tries to detect vendor's prices, it uses advanced algorithms. Even if exact price is not found, the program may try to calculate a price for another unit or fuzzy type based on a base price. For example, if you have entered default price for Words unit, but create an assignment with Lines unit (with adjustment factor set to 10), then the system will take base price per word and calculate price per line by multiplying existing price by 10.

Manual creation of translation assignment

To manually create an assignment, open list of translation assignments and click New. There are two options to create an assignment:

On the base of a translation job. Select a value in the Translation job field, and the system will offer to load tasks from the selected job. Language pair, Specialization and Translation project fields, as well as Service type, Unit and Fuzzy type columns in the Assignment tasks table, will become uneditable.
Manually. In this case, Translation job field remains empty, and you manually select values in the Language pair, Specialization and Translation project fields, as well as Service type, Unit and Fuzzy type columns in the Assignment tasks table. This approach allows to create assignments without linking them to base "incoming" job, which could be useful when you translate a content created by yourself, for example.

After selecting a job, select a Vendor. When vendor list is expanded, it will be automatically filtered by the job's language pair. To view all vendors, remove default filter or edit it to filter a list according your preferences. Of course, you can still use quick filters which are available in each column header of this table.

Translation assignment editing window: fields and buttons

As translation jobs, assignments has two statuses - Status of work and Status of payment. You can quickly change status of work via context menu (or Change status button on the ribbon) in the list of assignments. Also, it could be changed automatically when vendors deliver translations (through web-portal, if used). Status of payment also gets changed automatically when you (or vendor) create an invoice over assignment, and sub-sequentially when you create a payment over incoming invoice. Depending on status, assignments has different colors in the list. These colors may be changed according your preferences using conditional formatting feature.

The Deadline value is determined automatically from a base job, but you can adjust it as needed.

The Deadline (vendor's timezone) is determined by using the Time Zone value provided in the vendor's settings.

Rating allows you to save an evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

The PO Number field can be generated automatically according to a pattern specified in the application settings.

The Language pair field is not editable and it depends on a selected translation job.

The Fuzzy scheme field allows you to change a fuzzy scheme that has been determined automatically (from vendor's settings, from a base job, or from the global application settings). The Fuzzy scheme affects average volume calculation and price calculation mechanisms.

Price-list. Allows to explicitly specify price-list for an assignment, if you wish to use non-default price-list for a selected vendor. When you select any value in this field, if an assignment already contains some tasks, the system will offer you to re-determine price for all tasks.

Instructions tab gets filled automatically from a base job. Here you can provide additional instructions (with formatting support) to a vendor, which may be included in the Purchase order or mail message.

Files tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

Messages tab allows to exchange messages with vendors. In a contrast with messages in quotes and projects, messages in assignment allow to select target vendor to send a message to. Since assignment contains Candidates tab, where you can add multiple vendors, Messages table allow to select target vendor, and if you use vendor portal, users will see only messages directed to them, but not to other vendors. When you send a message, or when vendor replies, application sends notification to target users according to notification settings. Additionally, application automatically adds a message when vendors reply to your job offers, or leave comments when delivering translation assignments.

List of assignments

There are a number of buttons available in the assignment list:

Register invoice. Allows to create an incoming invoice and upload a file.

Create a payment. Creates a payment for an assignment and creates an invoice at the same time.

Generate POs. Allows to generate purchase order PDF files for all selected assignments and save them in the assignment files.

Apply vendor… button allows to select and apply same vendor to multiple selected assignments. This function is particularly useful when you are viewing list of assignments inside a project with many files, and you create separate assignment for each file. In such case, you may select multiple assignments with same target language and apply same translator to them all.

Create a message to vendor(s) allows to create individual or group job confirmations for selected assignments, as well as job offers for assignments which are being prepared. If you select confirmation message, application will automatically generate purchase orders, if they are missing.

Live filters button opens a side panel which allows to quickly apply some most frequently used filters to view jobs, for example, only from selected clients, or in specified domains, languages, currencies, statuses, amount ranges, etc.

For example, in the Clients field you select or search clients which you wish to display in the list of jobs. Some groups allow to make multiple selections (like Vendors or Language pairs) in the form of tags, while others provide checkboxes for selection (like Status) or range limits (Date or Amount).

When you provide a value in any of fields in the search panel, list will immediately reflect your selections. When you close search panel (by clicking Search button again on the toolbar), current filter will be automatically cancelled.

Printing purchase orders

To print a PO for the selected assignment, click the Print button. The system will determine the default PO template for a selected vendor and display the Print preview window. To explicitly choose the desired PO template, click the drop-down button and select a template from the list.

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list). See Custom reports article for details.

You can also generate purchase orders in a batch mode. To do this, select multiple assignments and click Generate POs button. The system will create purchase orders (without previewing) for each selected assignment, attach it as an internal file to each assignment, and then offer user to save all generated POs to hard drive.

Sending purchase orders

Select assignment(s) and Click the Generate POs button to generate a PO and attach it to assignments.
Click Create a message to vendor and select:
1. Individual confirmation messages to selected vendors - this will create a separate message for each assignment and will change the status of assignments to In work.
2. Single group confirmation message to all vendors - this will create one single message to all vendors, where the text will contain list of languages and vendor names for each language; status of all assignments will also be changed to In work.
Go to the message list, select the created message(s), optionally check the text and attached files, click Send.

If you use vendor portal, purchase order (PDF) will be sent along with job confirmation notification.

Automatic purchase order generation and sending

TBM can automatically create PO and send them to your vendors. There are a number of trigger actions for this to happen:

Change assignment status to In work, select a vendor in the Vendor filed and click Save to save an assignment;
Click Apply button in the Assignment candidates table.

The system will generate a purchase order according to a default template selected in the application settings or in a vendor profile. After that, the system will find a user linked with a vendor. If user found, then TBM will send a notification to that vendor according to notification settings of that user. It could be in-app notification (if you use vendor portal) and/or email notification. If user is not found, then application will attempt to send an e-mail message to e-mail address specified in a vendor profile. In both cases, to correctly send an e-mail notification, non-disabled message template for Purchase order should exists in the list of message templates, and in the list of Email accounts a default email account should be created.

In the result of this operation (PO generation and notification sending) you will see a toast message in the bottom right corner of the screen informing if it was successful (green) or not (red).

Invoice and payment creation

To create an incoming invoice and payment in a single action, select necessary translation assignment(s) and select Create payment. A new invoice and payment will be created for the amount of the selected assignments. When this payment will be saved, corresponding assignments will be marked as paid.

To register invoice from one vendor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Quick filtering in the list of assignments

In the list of assignments, you can use Quick filter button to quickly display limited set of assignments:

This button has three separate sections. First section allows to filter list by last 12 months. Second section allows to display assignments for one of top 15 vendors (vendors with largest amounts for all time). And third section allows to display ongoing assignments for selected vendor. Drop-down list of this option will contain names of all vendors who currently has ongoing (undelivered) jobs. In addition, each item in this list provides displays amount of assignments which will be shown when a filter is applied.

Main highlight of this feature is that filter is applied on a database level, which means that only filtered assignments will be retrieved from a database. In network environments, it allows to save traffic and improve performance of this table. If you apply additional filters in the grid itself, then this filter will be applied over current quick filter. Don’t forget about this. If you wish to view all assignments, click Quick filter > Clear filter.

Hidden columns in the list of assignments

By default, a number of columns in the list of assignments is hidden, to keep list simple and not overloaded with information. However, some of hidden columns may be more useful for you comparing to default ones. Here is a list of additional columns which you can display using List view customization feature:

Candidate statuses – displays statuses and number of vendors from the Vendor’s pickup table, providing overview about vendor pickup process;
Notes and Notes from vendor – text notes provided by manager and vendor;
Services – comma-separated list of work types listed in assignment tasks;
To-do – number of unchecked items in the Checklist table;

All other columns – default fields of translation assignment, which don’t require additional description here (Automation rule, Created at/by, Modified at/by, PO number, Price-list, etc.).

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments and outsourcing

Eugene Kuchynski — Fri, 04 Jun 2021 10:52:00 GMT

Revision 13 posted to Wiki by Eugene Kuchynski on 6/4/2021 10:52:00 AM

Overview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

Take a note that list of vendors in the drop-down list of the Vendor field will not include vendors with employment status other than Employed.

Take a note that the selection list won't show vendors marked as Archived. The Archive status of vendors can be changed from a list of vendors.

Manual creation of translation assignment

To manually create an assignment, open list of translation assignments and click New. There are two options to create an assignment:

On the base of a translation job. Select a value in the Translation job field, and the system will offer to load tasks from the selected job. Language pair, Specialization and Translation project fields, as well as Service type, Unit and Fuzzy type columns in the Assignment tasks table, will become uneditable.
Manually. In this case, Translation job field remains empty, and you manually select values in the Language pair, Specialization and Translation project fields, as well as Service type, Unit and Fuzzy type columns in the Assignment tasks table. This approach allows to create assignments without linking them to base "incoming" job, which could be useful when you translate a content created by yourself, for example.

Translation assignment editing window: fields and buttons

The Deadline value is determined automatically from a base job, but you can adjust it as needed.

The Deadline (vendor's timezone) is determined by using the Time Zone value provided in the vendor's settings.

Rating allows you to save an evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

The PO Number field can be generated automatically according to a pattern specified in the application settings.

The Language pair field is not editable and it depends on a selected translation job.

Files tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

List of assignments

There are a number of buttons available in the assignment list:

Register invoice. Allows to create an incoming invoice and upload a file.

Create a payment. Creates a payment for an assignment and creates an invoice at the same time.

Generate POs. Allows to generate purchase order PDF files for all selected assignments and save them in the assignment files.

Printing purchase orders

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Sending purchase orders

Select assignment(s) and Click the Generate POs button to generate a PO and attach it to assignments.
Click Create a message to vendor and select:
1. Individual confirmation messages to selected vendors - this will create a separate message for each assignment and will change the status of assignments to In work.
2. Single group confirmation message to all vendors - this will create one single message to all vendors, where the text will contain list of languages and vendor names for each language; status of all assignments will also be changed to In work.
Go to the message list, select the created message(s), optionally check the text and attached files, click Send.

Automatic purchase order generation and sending

TBM can automatically create PO and send them to your vendors. This happens when you assign (select) a vendor in an assignment and change status to In work. Then, when you press OK or Save, the system will generate a purchase order according to a default template selected in the application settings or in a vendor profile. After that, the system will find a user linked with a vendor. If user found, then TBM will send a notification to that vendor according to notification settings of that user. It could be in-app notification (if you use vendor portal) and/or email notification. If user is not found, then application will attempt to send an e-mail message to e-mail address specified in a vendor profile. In both cases, to correctly send an e-mail notification, non-disabled message template for Purchase order should exists in the list of message templates, and in the list of Email accounts a default email account should be created.

In the result of this operation (PO generation and notification sending) you will see a toast message in the bottom right corner of the screen informing if it was successful (green) or not (red).

Invoice and payment creation

To register invoice from one vendor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Quick filtering in the list of assignments

In the list of assignments, you can use Quick filter button to quickly display limited set of assignments:

Hidden columns in the list of assignments

Candidate statuses – displays statuses and number of vendors from the Vendor’s pickup table, providing overview about vendor pickup process;
Notes and Notes from vendor – text notes provided by manager and vendor;
Services – comma-separated list of work types listed in assignment tasks;
To-do – number of unchecked items in the Checklist table;

All other columns – default fields of translation assignment, which don’t require additional description here (Automation rule, Created at/by, Modified at/by, PO number, Price-list, etc.).

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments and outsourcing

Eugene Kuchynski — Mon, 26 Apr 2021 10:55:07 GMT

Revision 12 posted to Wiki by Eugene Kuchynski on 4/26/2021 10:55:07 AM

Overview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

Take a note that list of vendors in the drop-down list of the Vendor field will not include vendors with employment status other than Employed.

Take a note that the selection list won't show vendors marked as Archived. The Archive status of vendors can be changed from a list of vendors.

Manual creation of translation assignment

To manually create an assignment, open list of translation assignments and click New. There are two options to create an assignment:

On the base of a translation job. Select a value in the Translation job field, and the system will offer to load tasks from the selected job. Language pair, Specialization and Translation project fields, as well as Service type, Unit and Fuzzy type columns in the Assignment tasks table, will become uneditable.
Manually. In this case, Translation job field remains empty, and you manually select values in the Language pair, Specialization and Translation project fields, as well as Service type, Unit and Fuzzy type columns in the Assignment tasks table. This approach allows to create assignments without linking them to base "incoming" job, which could be useful when you translate a content created by yourself, for example.

Translation assignment editing window: fields and buttons

The Deadline value is determined automatically from a base job, but you can adjust it as needed.

The Deadline (vendor's timezone) is determined by using the Time Zone value provided in the vendor's settings.

Rating allows you to save an evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

The PO Number field can be generated automatically according to a pattern specified in the application settings.

The Language pair field is not editable and it depends on a selected translation job.

Files tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

List of assignments

There are a number of buttons available in the assignment list:

Register invoice. Allows to create an incoming invoice and upload a file.

Create a payment. Creates a payment for an assignment and creates an invoice at the same time.

Generate POs. Allows to generate purchase order PDF files for all selected assignments and save them in the assignment files.

Printing purchase orders

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Sending purchase orders

Select assignment(s) and Click the Generate POs button to generate a PO and attach it to assignments.
Click Create a message to vendor and select:
1. Individual confirmation messages to selected vendors - this will create a separate message for each assignment and will change the status of assignments to In work.
2. Single group confirmation message to all vendors - this will create one single message to all vendors, where the text will contain list of languages and vendor names for each language; status of all assignments will also be changed to In work.
Go to the message list, select the created message(s), optionally check the text and attached files, click Send.

Invoice and payment creation

To register invoice from one vendor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Quick filtering in the list of assignments

In the list of assignments, you can use Quick filter button to quickly display limited set of assignments:

Hidden columns in the list of assignments

Candidate statuses – displays statuses and number of vendors from the Vendor’s pickup table, providing overview about vendor pickup process;
Notes and Notes from vendor – text notes provided by manager and vendor;
Services – comma-separated list of work types listed in assignment tasks;
To-do – number of unchecked items in the Checklist table;

All other columns – default fields of translation assignment, which don’t require additional description here (Automation rule, Created at/by, Modified at/by, PO number, Price-list, etc.).

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments and outsourcing

Eugene Kuchynski — Fri, 23 Apr 2021 06:06:12 GMT

Revision 11 posted to Wiki by Eugene Kuchynski on 4/23/2021 6:06:12 AM

Overview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

Take a note that list of vendors in the drop-down list of the Vendor field will not include vendors with employment status other than Employed.

Take a note that the selection list won't show vendors marked as Archived. The Archive status of vendors can be changed from a list of vendors.

Manual creation of translation assignment

To manually create an assignment, open list of translation assignments and click New. There are two options to create an assignment:

On the base of a translation job. Select a value in the Translation job field, and the system will offer to load tasks from the selected job. Language pair, Specialization and Translation project fields, as well as Service type, Unit and Fuzzy type columns in the Assignment tasks table, will become uneditable.
Manually. In this case, Translation job field remains empty, and you manually select values in the Language pair, Specialization and Translation project fields, as well as Service type, Unit and Fuzzy type columns in the Assignment tasks table. This approach allows to create assignments without linking them to base "incoming" job, which could be useful when you translate a content created by yourself, for example.

Translation assignment editing window: fields and buttons

The Deadline value is determined automatically from a base job, but you can adjust it as needed.

The Deadline (vendor's timezone) is determined by using the Time Zone value provided in the vendor's settings.

Rating allows you to save an evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

The PO Number field can be generated automatically according to a pattern specified in the application settings.

The Language pair field is not editable and it depends on a selected translation job.

Files tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

List of assignments

There are a number of buttons available in the assignment list:

Register invoice. Allows to create an incoming invoice and upload a file.

Create a payment. Creates a payment for an assignment and creates an invoice at the same time.

Generate POs. Allows to generate purchase order PDF files for all selected assignments and save them in the assignment files.

Printing purchase orders

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Sending purchase orders

Select assignment(s) and Click the Generate POs button to generate a PO and attach it to assignments.
Click Create a message to vendor and select:
1. Individual confirmation messages to selected vendors - this will create a separate message for each assignment and will change the status of assignments to In work.
2. Single group confirmation message to all vendors - this will create one single message to all vendors, where the text will contain list of languages and vendor names for each language; status of all assignments will also be changed to In work.
Go to the message list, select the created message(s), optionally check the text and attached files, click Send.

Invoice and payment creation

To register invoice from one vendor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Quick filtering in the list of assignments

In the list of assignments, you can use Quick filter button to quickly display limited set of assignments:

Hidden columns in the list of assignments

Candidate statuses – displays statuses and number of vendors from the Vendor’s pickup table, providing overview about vendor pickup process;
Notes and Notes from vendor – text notes provided by manager and vendor;
Services – comma-separated list of work types listed in assignment tasks;
To-do – number of unchecked items in the Checklist table;

All other columns – default fields of translation assignment, which don’t require additional description here (Automation rule, Created at/by, Modified at/by, PO number, Price-list, etc.).

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments and outsourcing

Eugene Kuchynski — Thu, 04 Jun 2020 10:51:37 GMT

Revision 10 posted to Wiki by Eugene Kuchynski on 6/4/2020 10:51:37 AM

Overview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

In the Vendor field, in addition to drop-down button for quick selection of vendors, you can use a button with three dots icon, which allows to open popup window to select a vendor. Advantage of this window is that it contains additional live filters on the right panel, as well as list of recent assignments for a selected vendor at the bottom. This all gives more flexibility and visibility while choosing a vendor for a project.

Take a note that list of vendors in the drop-down list of the Vendor field will not include vendors with employment status other than Employed.

Take a note that the selection list won't show vendors marked as Archived. The Archive status of vendors can be changed from a list of vendors.

To quickly view default rates for the currently selected vendor, just hover mouse pointer over the Vendor field. You will see a tooltip with vendor's price-list. If tooltip is not shown, this means that this vendor has no default rates defined.

Manual creation of translation assignment

To manually create an assignment, open list of translation assignments and click New. There are two options to create an assignment:

On the base of a translation job. Select a value in the Translation job field, and the system will offer to load tasks from the selected job. Language pair, Specialization and Translation project fields, as well as Service type, Unit and Fuzzy type columns in the Assignment tasks table, will become uneditable.
Manually. In this case, Translation job field remains empty, and you manually select values in the Language pair, Specialization and Translation project fields, as well as Service type, Unit and Fuzzy type columns in the Assignment tasks table. This approach allows to create assignments without linking them to base "incoming" job, which could be useful when you translate a content created by yourself, for example.

In Online version, list of vendors includes icons if a vendor is approved in a current language pair or specialization:

Translation assignment editing window: fields and buttons

The Deadline value is determined automatically from a base job, but you can adjust it as needed.

The Deadline (vendor's timezone) is determined by using the Time Zone value provided in the vendor's settings.

Rating allows you to save an evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

The PO Number field can be generated automatically according to a pattern specified in the application settings.

The Language pair field is not editable and it depends on a selected translation job.

Files tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

On the ribbon toolbar, you will find GroupShare button, which allows to link current assignment with particular files in GroupShare project. To establish a link, click this button and then select Link with files. If base job (or job’s project) is linked with a GroupShare project, a popup dialog will appear, allowing you to select one or multiple files from a project. Otherwise, error message will be shown. After establishing a link with files, Progress column in the list of assignments will be displaying current progress of an assignment.

To break a link with all linked files, select GroupShare > Unlink from all files.

List of assignments

In the list of assignments, you can find Progress column (which is hidden by default and can be displayed using Column chooser). This column displays information about current progress of an assignment in SDL GroupShare. See Linking and syncing projects/jobs article for details.

Also, in the list of assignments, there is the Apply vendor… button available, which allows to select and apply same vendor to multiple selected assignments. This function is particularly useful when you are viewing list of assignments inside a project with many files, and you create separate assignment for each file. In such case, you may select multiple assignments with same target language and apply same translator to them all.

Printing purchase orders

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Sending purchase orders

Select assignment(s) and Click the Generate POs button to generate a PO and attach it to assignments.
Click Create a message to vendor and select:
1. Individual confirmation messages to selected vendors - this will create a separate message for each assignment and will change the status of assignments to In work.
2. Single group confirmation message to all vendors - this will create one single message to all vendors, where the text will contain list of languages and vendor names for each language; status of all assignments will also be changed to In work.
Go to the message list, select the created message(s), optionally check the text and attached files, click Send.

Invoice and payment creation

To register invoice from one vendor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Quick filtering in the list of assignments

In the list of assignments, you can use Quick filter button to quickly display limited set of assignments:

Hidden columns in the list of assignments

Candidate statuses – displays statuses and number of vendors from the Vendor’s pickup table, providing overview about vendor pickup process;
Notes and Notes from vendor – text notes provided by manager and vendor;
Progress – if assignment is linked with GroupShare project, this column will display current progress of work;
Services – comma-separated list of work types listed in assignment tasks;
To-do – number of unchecked items in the Checklist table;

All other columns – default fields of translation assignment, which don’t require additional description here (Automation rule, Created at/by, Modified at/by, PO number, Price-list, etc.).

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments and outsourcing

Eugene Kuchynski — Mon, 09 Dec 2019 06:12:59 GMT

Revision 9 posted to Wiki by Eugene Kuchynski on 12/9/2019 6:12:59 AM

coOverview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

Take a note that list of vendors in the drop-down list of the Vendor field will not include vendors with employment status other than Employed.

Take a note that the selection list won't show vendors marked as Archived. The Archive status of vendors can be changed from a list of vendors.

Manual creation of translation assignment

To manually create an assignment, open list of translation assignments and click New. First main step is to select a value in the Translation job field. The system will offer to load tasks from the selected job. It would not be possible to save an assignment without selecting base job.

Translation assignment editing window: fields and buttons

The Deadline value is determined automatically from a base job, but you can adjust it as needed.

The Deadline (vendor's timezone) is determined by using the Time Zone value provided in the vendor's settings.

Rating allows you to save an evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

The PO Number field can be generated automatically according to a pattern specified in the application settings.

The Language pair field is not editable and it depends on a selected translation job.

Files tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

To break a link with all linked files, select GroupShare > Unlink from all files.

List of assignments

Printing purchase orders

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Sending purchase orders

Select assignment(s) and Click the Generate POs button to generate a PO and attach it to assignments.
Click Create a message to vendor and select:
1. Individual confirmation messages to selected vendors - this will create a separate message for each assignment and will change the status of assignments to In work.
2. Single group confirmation message to all vendors - this will create one single message to all vendors, where the text will contain list of languages and vendor names for each language; status of all assignments will also be changed to In work.
Go to the message list, select the created message(s), optionally check the text and attached files, click Send.

Invoice and payment creation

To register invoice from one vendor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Quick filtering in the list of assignments

In the list of assignments, you can use Quick filter button to quickly display limited set of assignments:

Hidden columns in the list of assignments

Candidate statuses – displays statuses and number of vendors from the Vendor’s pickup table, providing overview about vendor pickup process;
Notes and Notes from vendor – text notes provided by manager and vendor;
Progress – if assignment is linked with GroupShare project, this column will display current progress of work;
Services – comma-separated list of work types listed in assignment tasks;
To-do – number of unchecked items in the Checklist table;

All other columns – default fields of translation assignment, which don’t require additional description here (Automation rule, Created at/by, Modified at/by, PO number, Price-list, etc.).

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments and outsourcing

Paul Filkin — Fri, 13 Sep 2019 08:56:31 GMT

Revision 8 posted to Wiki by Paul Filkin on 9/13/2019 8:56:31 AM

Overview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

The list of Assignment tasks will be automatically filled based on a job's list list of tasks. Since each job task can be assigned to different contractors, by default the system will put currently unassigned quantity to the Quantity column. If you split some task between different contractors, decrease a number in the Quantity column.

Select a value in the Contractor field. When a collaborator is selected, the system will offer to automatically detect rates in each row of the tasks table. When information from base job is read, all prices in this table are automatically set to zero. If you change any prices manually in the tasks table, you can always use Re-detect prices button to load default prices of the currently selected vendor.

Take a note that the selection list won't show contractors marked as Archived. The Archive status of contractors can be changed from a list of contractors.

To quickly view default rates for the currently selected contractor, just hover mouse pointer over Contractor field. You will see a tooltip with contractor's price-list. If tooltip is not shown, this means that this contractor has no default rates defined.

When SDL Trados Business Manager tries to detect contractor's prices, it uses advanced algorithms. Even if exact price is not found, the program may try to calculate a price for another unit or fuzzy type based on a base price. For example, if you have entered default price for Words unit, but create an assignment with Lines unit (with adjustment factor set to 10), then the system will take base price per word and calculate price per line by multiplying existing price by 10.

Manual creation of translation assignment

After selecting a job, select a Contractor. When vendor list is expanded, it will be automatically filtered by the job's language pair. To view all contractors, remove default filter or edit it to filter a list according your preferences. Of course, you can still use quick filters which are available in each column header of this table.

Field description

The Deadline value is determined automatically from a base job, but you can adjust it as needed.

The Deadline (vendor's timezone) is determined by using the Time Zone value provided in the contractor's settings.

Rating allows you to save an evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

The PO Number field can be generated automatically according to a pattern specified in the application settings.

The Language pair field is not editable and it depends on a selected translation job.

The Fuzzy scheme field allows you to change a fuzzy scheme that has been determined automatically (from contractor's settings, from a base job, or from the global application settings). The Fuzzy scheme affects average volume calculation and price calculation mechanisms.

File attachments tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

Printing purchase orders

To print a PO for the selected assignment, click the Print button. The system will determine the default PO template for a selected contractor and display the Print preview window. To explicitly choose the desired PO template, click the drop-down button and select a template from the list.

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Sending purchase orders

Select assignment(s) and Click the Generate POs button to generate a PO and attach it to assignments.
Click Create a message to contractor and select:
1. Individual confirmation messages to selected contractors - this will create a separate message for each assignment and will change the status of assignments to In work.
2. Single group confirmation message to all contractors - this will create one single message to all contractors, where the text will contain list of languages and contractor names for each language; status of all assignments will also be changed to In work.
Go to the message list, select the created message(s), optionally check the text and attached files, click Send.

Invoice and payment creation

To register invoice from one contractor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments and outsourcing

Eugene Kuchynski — Tue, 13 Aug 2019 06:19:09 GMT

Revision 7 posted to Wiki by Eugene Kuchynski on 8/13/2019 6:19:09 AM

Overview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

Take a note that the selection list won't show contractors marked as Archived. The Archive status of contractors can be changed from a list of contractors.

When SDL BaccS tries to detect contractor's prices, it uses advanced algorithms. Even if exact price is not found, the program may try to calculate a price for another unit or fuzzy type based on a base price. For example, if you have entered default price for Words unit, but create an assignment with Lines unit (with adjustment factor set to 10), then the system will take base price per word and calculate price per line by multiplying existing price by 10.

Manual creation of translation assignment

Field description

The Deadline value is determined automatically from a base job, but you can adjust it as needed.

The Deadline (vendor's timezone) is determined by using the Time Zone value provided in the contractor's settings.

Rating allows you to save an evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

The PO Number field can be generated automatically according to a pattern specified in the application settings.

The Language pair field is not editable and it depends on a selected translation job.

File attachments tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

Printing purchase orders

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Sending purchase orders

Select assignment(s) and Click the Generate POs button to generate a PO and attach it to assignments.
Click Create a message to contractor and select:
1. Individual confirmation messages to selected contractors - this will create a separate message for each assignment and will change the status of assignments to In work.
2. Single group confirmation message to all contractors - this will create one single message to all contractors, where the text will contain list of languages and contractor names for each language; status of all assignments will also be changed to In work.
Go to the message list, select the created message(s), optionally check the text and attached files, click Send.

Invoice and payment creation

To register invoice from one contractor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments and outsourcing

Paul Filkin — Mon, 12 Aug 2019 07:58:22 GMT

Revision 6 posted to Wiki by Paul Filkin on 8/12/2019 7:58:22 AM

Overview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

Take a note that the selection list won't show contractors marked as Archived. The Archive status of contractors can be changed from a list of contractors.

Manual creation of translation assignment

Field description

The Deadline value is determined automatically from a base job, but you can adjust it as needed.

The Deadline (vendor's timezone) is determined by using the Time Zone value provided in the contractor's settings.

Rating allows you to save an evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

The PO Number field can be generated automatically according to a pattern specified in the application settings.

The Language pair field is not editable and it depends on a selected translation job.

File attachments tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

Printing purchase orders

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Sending purchase orders

Select assignment(s) and Click the Generate POs button to generate a PO and attach it to assignments.
Click Create a message to contractor and select:
1. Individual confirmation messages to selected contractors - this will create a separate message for each assignment and will change the status of assignments to In work.
2. Single group confirmation message to all contractors - this will create one single message to all contractors, where the text will contain list of languages and contractor names for each language; status of all assignments will also be changed to In work.
Go to the message list, select the created message(s), optionally check the text and attached files, click Send.

Invoice and payment creation

To register invoice from one contractor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments and outsourcing

Eugene Kuchynski — Fri, 19 Jul 2019 12:36:37 GMT

Revision 5 posted to Wiki by Eugene Kuchynski on 7/19/2019 12:36:37 PM

Overview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

Take a note that selection list won't show contractors marked as Archived. Archive status of contractors can be changed from a list of contractors.

Manual creation of translation assignment

Field description

Deadline value is determined automatically, from a base job, but you can adjust it as needed.

Deadline (vendor's timezone) is determined based on a Time Zone value provided in the contractor's settings.

Rating allows to save evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

PO Number field can be generated automatically according a pattern specified in the application settings.

Language pair field is not editable and depends on a selected translation job.

Fuzzy scheme field allows to change fuzzy scheme determined automatically (from contractor's settings, from base job, or from global application settings). Fuzzy scheme affects on average volume calculation and price calculation mechanisms.

File attachments tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

Printing purchase orders

To print a PO for the selected assignment, click Print button. The system will determine default PO template for a selected contractor and display Print preview window. To explicitly choose desired PO template, click drop-down button and select a template from the list.

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Sending purchase orders

Select assignment(s) and Click Generate POs button to generate PO and attach it to assignments.
Click Create a message to contractor and select:
1. Individual confirmation messages to selected contractors - this will create separate message per each assignment and change status of assignments to In work.
2. Single group confirmation message to all contractors - this will create one single message to all contractors, where the text will contain list of languages and contractor names for each language; status of all assignments will also be changed to In work.
Go to message list, select created message(s), optionally check text and attached files, and click Send.

Invoice and payment creation

To register invoice from one contractor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments and outsourcing

Eugene Kuchynski — Thu, 18 Jul 2019 11:41:02 GMT

Revision 4 posted to Wiki by Eugene Kuchynski on 7/18/2019 11:41:02 AM

Overview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

Take a note that selection list won't show contractors marked as Archived. Archive status of contractors can be changed from a list of contractors.

Manual creation of translation assignment

Field description

Deadline value is determined automatically, from a base job, but you can adjust it as needed.

Deadline (vendor's timezone) is determined based on a Time Zone value provided in the contractor's settings.

Rating allows to save evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

PO Number field can be generated automatically according a pattern specified in the application settings.

Language pair field is not editable and depends on a selected translation job.

File attachments tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

Printing purchase orders

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Invoice and payment creation

To register invoice from one contractor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments and outsourcing

Eugene Kuchynski — Thu, 18 Jul 2019 11:37:19 GMT

Revision 3 posted to Wiki by Eugene Kuchynski on 7/18/2019 11:37:19 AM

Overview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

Manual creation of translation assignment

Field description

Deadline value is determined automatically, from a base job, but you can adjust it as needed.

Deadline (vendor's timezone) is determined based on a Time Zone value provided in the contractor's settings.

Rating allows to save evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

PO Number field can be generated automatically according a pattern specified in the application settings.

Language pair field is not editable and depends on a selected translation job.

File attachments tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

Printing purchase orders

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Invoice and payment creation

To register invoice from one contractor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments and outsourcing

Eugene Kuchynski — Tue, 16 Jul 2019 07:08:20 GMT

Revision 2 posted to Wiki by Eugene Kuchynski on 7/16/2019 7:08:20 AM

Overview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

This button provides two choices: One assignment for all unassigned tasks or Separate assignment per each unassigned task (for example, if a job contains multiple translation tasks, proofreading and review tasks, then the system will create three assignments - one per each work type).

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

Manual creation of translation assignment

Field description

Deadline value is determined automatically, from a base job, but you can adjust it as needed.

Deadline (vendor's timezone) is determined based on a Time Zone value provided in the contractor's settings.

Rating allows to save evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

PO Number field can be generated automatically according a pattern specified in the application settings.

Language pair field is not editable and depends on a selected translation job.

File attachments tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

Printing purchase orders

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Invoice and payment creation

To register invoice from one contractor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice

Translation assignments1

Eugene Kuchynski — Tue, 16 Jul 2019 07:07:51 GMT

Revision 1 posted to Wiki by Eugene Kuchynski on 7/16/2019 7:07:51 AM

Overview

There are few ways to create assignments.

Translation assignment from list of jobs

The first is semi-automatic, when you select any job in the job list and select Create translation assignment button:

After pressing this button new assignment(s) will be created. Here is default look of the translation assignment editing form:

Manual creation of translation assignment

Field description

Deadline value is determined automatically, from a base job, but you can adjust it as needed.

Deadline (vendor's timezone) is determined based on a Time Zone value provided in the contractor's settings.

Rating allows to save evaluation of the job quality. In future this rating will be used to recommend one or another translator for the assigned job.

PO Number field can be generated automatically according a pattern specified in the application settings.

Language pair field is not editable and depends on a selected translation job.

File attachments tab allows to attach files to assignment (source files, reference files, glossaries, TMs, etc.). See this article which describes how to work with file attachments.

Printing purchase orders

As with any templates, you are free to create own PO templates. You can start creating own template by cloning built-in template (open Reports - Reports, and find PO template in the list).

Invoice and payment creation

To register invoice from one contractor for a number of assignments (or to register invoice by Vendor), select these assignment and select Register invoice button.

Tags: documents, PO, translation, payment, purchase order, assignments, Invoice