Changing the installed languages (Trados Studio 2019 Freelance or earlier versions only)

Elisa Maxim — Wed, 12 Feb 2025 22:03:46 GMT

Current Revision posted to Customer Experience by Elisa Maxim on 2/12/2025 10:03:46 PM

This article is for users of Trados Studio 2019 or earlier, who may need to change the installed languages. This does not apply to users of Trados Studio 2021, as these limitations have been removed.

Trados Studio Freelance (2019 or earlier), allows you to select 5 languages when installing the application, which cannot be changed easily once selected.

The only way to change the languages (admin rights are required) is to access the Windows Registry

WARNING-

The following instructions require that you access and edit the Windows registry!

DO NOT CONTINUE- ifyou feel uncomfortable accessing and editing registry entries. Errors/mistakes when editing the registry can have serious/irreversible consequences.

How to edit the Registry -Windows 8/10 machines only- We no longer support W7 as Microsoft have retired this Operating System).

1) Click on the Windows icon and simply start typing REGEDIT (Admin rights are required)

2) Now click on the Registry Editor

3) when prompted, click YES to-

You are now accessing the Windows Registry. The folder structure will appear as follows.

Now select the HKEY_CURRENT_USER and Software folder

Now click on the Software folder and scroll down to Microsoft and Language Overlay

(Please Note- you will not see the LDSR folders if you are running Studio Professional).

In the following example- you will see THREE folders (ignore the folder ending in _old for the time being)

LDSRClient15 (Trados Studio 2019)

LDSRClient15_old

LDSRClient5 (Trados Studio 2017)

Click (highlight) the required version...

15 = Trados Studio 2019

5= Trados Studio 2017

Right Click and rename

Just add _old (and then press Enter)- the entry should now look as follows.

You can now close the Registry and restart Studio you will be required to set up Studio as though this was a first install

If you return to the registry settings, please note you will now have TWO entries for the same version

The folder with the extension _old...is the disabled folder, and can be deleted if Studio has re- started without any problems).

LDSRClient15 is now the newly applied folder for the new language settings.

03.7 Changing the installed languages (Trados Studio 2019 Freelance or earlier versions only)

Elisa Maxim — Fri, 11 Aug 2023 07:59:10 GMT

Revision 9 posted to Customer Experience by Elisa Maxim on 8/11/2023 7:59:10 AM

Trados Studio Freelance (2019 or earlier), allows you to select 5 languages when installing the application, which cannot be changed easily once selected.

The only way to change the languages (admin rights are required) is to access the Windows Registry

WARNING-

The following instructions require that you access and edit the Windows registry!

DO NOT CONTINUE- ifyou feel uncomfortable accessing and editing registry entries. Errors/mistakes when editing the registry can have serious/irreversible consequences.

How to edit the Registry -Windows 8/10 machines only- We no longer support W7 as Microsoft have retired this Operating System).

1) Click on the Windows icon and simply start typing REGEDIT (Admin rights are required)

2) Now click on the Registry Editor

3) when prompted, click YES to-

You are now accessing the Windows Registry. The folder structure will appear as follows.

Now select the HKEY_CURRENT_USER and Software folder

Now click on the Software folder and scroll down to Microsoft and Language Overlay

(Please Note- you will not see the LDSR folders if you are running Studio Professional).

In the following example- you will see THREE folders (ignore the folder ending in _old for the time being)

LDSRClient15 (Trados Studio 2019)

LDSRClient15_old

LDSRClient5 (Trados Studio 2017)

Click (highlight) the required version...

15 = Trados Studio 2019

5= Trados Studio 2017

Right Click and rename

Just add _old (and then press Enter)- the entry should now look as follows.

You can now close the Registry and restart Studio you will be required to set up Studio as though this was a first install

If you return to the registry settings, please note you will now have TWO entries for the same version

The folder with the extension _old...is the disabled folder, and can be deleted if Studio has re- started without any problems).

LDSRClient15 is now the newly applied folder for the new language settings.

03.7 Changing the installed languages (Trados Studio 2019 Freelance or earlier versions only)

Elisa Maxim — Wed, 26 Jul 2023 08:22:17 GMT

Revision 8 posted to Customer Experience by Elisa Maxim on 7/26/2023 8:22:17 AM

Trados Studio Freelance (2019 or earlier), allows you to select 5 languages when installing the application, which cannot be changed easily once selected.

The only way to change the languages (admin rights are required) is to access the Windows Registry

WARNING-

The following instructions require that you access and edit the Windows registry!

DO NOT CONTINUE- ifyou feel uncomfortable accessing and editing registry entries. Errors/mistakes when editing the registry can have serious/irreversible consequences.

How to edit the Registry -Windows 8/10 machines only- We no longer support W7 as Microsoft have retired this Operating System).

1) Click on the Windows icon and simply start typing REGEDIT (Admin rights are required)

2) Now click on the Registry Editor

3) when prompted, click YES to-

You are now accessing the Windows Registry. The folder structure will appear as follows.

Now select the HKEY_CURRENT_USER and Software folder

Now click on the Software folder and scroll down to Microsoft and Language Overlay

(Please Note- you will not see the LDSR folders if you are running Studio Professional).

In the following example- you will see THREE folders (ignore the folder ending in _old for the time being)

LDSRClient15 (SDL Trados Studio 2019)

LDSRClient15_old

LDSRClient5 (SDL Trados Studio 2017)

Click (highlight) the required version...

15 = SDL Trados Studio 2019

5= SDL Trados Studio 2017

Right Click and rename

Just add _old (and then press Enter)- the entry should now look as follows.

You can now close the Registry and restart Studio you will be required to set up Studio as though this was a first install

If you return to the registry settings, please note you will now have TWO entries for the same version

The folder with the extension _old...is the disabled folder, and can be deleted if Studio has re- started without any problems).

LDSRClient15 is now the newly applied folder for the new language settings.

03.7 Changing the installed languages (Trados Studio 2019 Freelance or earlier version only)

Oana Nagy — Mon, 22 Mar 2021 15:32:23 GMT

Revision 7 posted to Customer Experience by Oana Nagy on 3/22/2021 3:32:23 PM

Trados Studio Freelance (2019 or earlier), allows you to select 5 languages when installing the application, which cannot be changed easily once selected.

The only way to change the languages (admin rights are required) is to access the Windows Registry

WARNING-

The following instructions require that you access and edit the Windows registry!

DO NOT CONTINUE- ifyou feel uncomfortable accessing and editing registry entries. Errors/mistakes when editing the registry can have serious/irreversible consequences.

How to edit the Registry -Windows 8/10 machines only- We no longer support W7 as Microsoft have retired this Operating System).

1) Click on the Windows icon and simply start typing REGEDIT (Admin rights are required)

2) Now click on the Registry Editor

3) when prompted, click YES to-

You are now accessing the Windows Registry. The folder structure will appear as follows.

Now select the HKEY_CURRENT_USER and Software folder

Now click on the Software folder and scroll down to Microsoft and Language Overlay

(Please Note- you will not see the LDSR folders if you are running Studio Professional).

In the following example- you will see THREE folders (ignore the folder ending in _old for the time being)

LDSRClient15 (SDL Trados Studio 2019)

LDSRClient15_old

LDSRClient5 (SDL Trados Studio 2017)

Click (highlight) the required version...

15 = SDL Trados Studio 2019

5= SDL Trados Studio 2017

Right Click and rename

Just add _old (and then press Enter)- the entry should now look as follows.

You can now close the Registry and restart Studio you will be required to set up Studio as though this was a first install

If you return to the registry settings, please note you will now have TWO entries for the same version

The folder with the extension _old...is the disabled folder, and can be deleted if Studio has re- started without any problems).

LDSRClient15 is now the newly applied folder for the new language settings.

03.6 Changing the installed languages (Trados Studio 2019 Freelance or earlier version only)

Oana Nagy — Mon, 22 Mar 2021 15:31:15 GMT

Revision 6 posted to Customer Experience by Oana Nagy on 3/22/2021 3:31:15 PM

Trados Studio Freelance (2019 or earlier), allows you to select 5 languages when installing the application, which cannot be changed easily once selected.

The only way to change the languages (admin rights are required) is to access the Windows Registry

WARNING-

The following instructions require that you access and edit the Windows registry!

DO NOT CONTINUE- ifyou feel uncomfortable accessing and editing registry entries. Errors/mistakes when editing the registry can have serious/irreversible consequences.

How to edit the Registry -Windows 8/10 machines only- We no longer support W7 as Microsoft have retired this Operating System).

1) Click on the Windows icon and simply start typing REGEDIT (Admin rights are required)

2) Now click on the Registry Editor

3) when prompted, click YES to-

You are now accessing the Windows Registry. The folder structure will appear as follows.

Now select the HKEY_CURRENT_USER and Software folder

Now click on the Software folder and scroll down to Microsoft and Language Overlay

(Please Note- you will not see the LDSR folders if you are running Studio Professional).

In the following example- you will see THREE folders (ignore the folder ending in _old for the time being)

LDSRClient15 (SDL Trados Studio 2019)

LDSRClient15_old

LDSRClient5 (SDL Trados Studio 2017)

Click (highlight) the required version...

15 = SDL Trados Studio 2019

5= SDL Trados Studio 2017

Right Click and rename

Just add _old (and then press Enter)- the entry should now look as follows.

You can now close the Registry and restart Studio you will be required to set up Studio as though this was a first install

If you return to the registry settings, please note you will now have TWO entries for the same version

The folder with the extension _old...is the disabled folder, and can be deleted if Studio has re- started without any problems).

LDSRClient15 is now the newly applied folder for the new language settings.

03.5 Changing the installed languages (Trados Studio 2019 Freelance or earlier version only)

Oana Nagy — Mon, 22 Mar 2021 15:27:46 GMT

Revision 5 posted to Customer Experience by Oana Nagy on 3/22/2021 3:27:46 PM

This article is for users of Trados Studio 2019 or earlier, who may need to change the installed languages.

This does not apply to users of Trados Studio 2021 as, these limitations have been removed.

Trados Studio Freelance, allows you to select 5 languages when installing the application.

Once you have completed the installation of SDL Trados Studio, there are no 'out of the box' solution, to enable you to change the installed languages.

The only way to do this, (admin rights are required) is to access the Windows Registry

WARNING-

The following instructions require that you access and edit the Windows registry!

DO NOT CONTINUE- ifyou feel uncomfortable accessing and editing registry entries. Errors/mistakes when editing the registry can have serious/irreversible consequences.

How to edit the Registry -Windows 8/10 machines only- We no longer support W7 as Microsoft have retired this Operating System)

1) Click on the Windows icon and simply start typing REGEDIT (Admin rights are required)

2) Now click on the Registry Editor

3) when prompted, click YES to-

You are now accessing the Windows Registry. The folder structure will appear as follows.

Now select the HKEY_CURRENT_USER and Software folder

Now click on the Software folder and scroll down to Microsoft and Language Overlay

(Please Note- you will not see the LDSR folders if you are running Studio Professional).

In the following example- you will see THREE folders (ignore the folder ending in _old for the time being)

LDSRClient15 (SDL Trados Studio 2019)

LDSRClient15_old

LDSRClient5 (SDL Trados Studio 2017)

Click (highlight) the required version...

15 = SDL Trados Studio 2019

5= SDL Trados Studio 2017

Right Click and rename

Just add _old (and then press Enter)- the entry should now look as follows.

You can now close the Registry and restart Studio you will be required to set up Studio as though this was a first install

If you return to the registry settings, please note you will now have TWO entries for the same version

The folder with the extension _old...is the disabled folder (and can be deleted if Studio has started without any problems)

LDSRClient15 is now the newly applied folder for the new language settings.

How to: Change the Installed languages (Freelance versions only)

Oana Nagy — Mon, 22 Mar 2021 14:09:22 GMT

Revision 4 posted to Customer Experience by Oana Nagy on 3/22/2021 2:09:22 PM

SDL Studio Freelance allows you to select 5 languages when installing the application.

Once you have completed the installation of SDL Trados Studio, there are no 'out of the box' solutions to enable you to change the installed languages. The only way to do this, (admin rights are required) is to access the Windows Registry

WARNING-

The following instructions require that you access and edit the Windows registry!

Do not continue if...

...you feel uncomfortable accessing and editing registry entries. Errors/mistakes when editing the registry can have serious/irreversible consequences

How to edit the Registry -Windows 8/10 machines only- We no longer support W7 as Microsoft have retired this Operating System)

1) Click on the Windows icon and simply start typing REGEDIT (Admin rights are required)

2) Now click on the Registry Editor

3) when prompted, click YES to-

You are now accessing the Windows Registry. The folder structure will appear as follows.

Now select the HKEY_CURRENT_USER and Software folder

Now click on the Software folder and scroll down to MicroSoft and Language Overlay

(Please Note- you will not see the LDSR folders if you are running Studio Professional).

In the following example- you will see THREE folders (ignore the folder ending in _old for the time being)

LDSRClient15 (SDL Trados Studio 2019)

LDSRClient15_old

LDSRClient5 (SDL Trados Studio 2017)

Click (highlight) the required version...

15 = SDL Trados Studio 2019

5= SDL Trados Studio 2017

Right Click and rename

Just add _old (and then press Enter)- the entry should now look as follows.

You can now close the Registry and restart Studio you will be required to set up Studio as though this was a first install

If you return to the registry settings, please note you will now have TWO entries for the same version

The folder with the extension _old...is the disabled folder (and can be deleted if Studio has started without any problems)

LDSRClient15 is now the newly applied folder for the new language settings.

How to: Change the Installed languages (Freelance versions only)

Oana Nagy — Tue, 21 Jan 2020 12:32:21 GMT

Revision 3 posted to Customer Experience by Oana Nagy on 1/21/2020 12:32:21 PM

SDL Studio Freelance allows you to select 5 languages when installing the application.

WARNING-

The following instructions require that you access and edit the Windows registry!

Do not continue if...

...you feel comfortable accessing and editing registry entries. Errors/mistakes when editing the registry can have serious/irreversible consequences

How to edit the Registry -Windows 8/10 machines only- We no longer support W7 as Microsoft have retired this Operating System)

1) Click on the Windows icon and simply start typing REGEDIT (Admin rights are required)

2) Now click on the Registry Editor

3) when prompted, click YES to-

You are now accessing the Windows Registry. The folder structure will appear as follows.

Now select the HKEY_CURRENT_USER and Software folder

Now click on the Software folder and scroll down to MicroSoft and Language Overlay

(Please Note- you will not see the LDSR folders if you are running Studio Professional).

In the following example- you will see THREE folders (ignore the folder ending in _old for the time being)

LDSRClient15 (SDL Trados Studio 2019)

LDSRClient15_old

LDSRClient5 (SDL Trados Studio 2017)

Click (highlight) the required version...

15 = SDL Trados Studio 2019

5= SDL Trados Studio 2017

Right Click and rename

Just add _old (and then press Enter)- the entry should now look as follows.

You can now close the Registry and restart Studio you will be required to set up Studio as though this was a first install

If you return to the registry settings, please note you will now have TWO entries for the same version

The folder with the extension _old...is the disabled folder (and can be deleted if Studio has started without any problems)

LDSRClient15 is now the newly applied folder for the new language settings.

How to: Change the Installed languages (Freelance versions only)

Oana Nagy — Tue, 21 Jan 2020 12:30:30 GMT

Revision 2 posted to Customer Experience by Oana Nagy on 1/21/2020 12:30:30 PM

SDL Studio Freelance allows you to select 5 languages when installing the application.

WARNING-

The following instructions require that you access and edit the Windows registry!

Do not continue if...

...you feel comfortable accessing and editing registry entries. Errors/mistakes when editing the registry can have serious/irreversible consequences

How to edit the Registry (Windows 8/10 machines only- Windows 7 is no longer supported)

1) Click on the Windows icon and simply start typing REGEDIT (Admin rights are required)

2) Now click on the Registry Editor

3) when prompted, click YES to-

You are now accessing the Windows Registry. The folder structure will appear as follows.

Now select the HKEY_CURRENT_USER and Software folder

Now click on the Software folder and scroll down to MicroSoft and Language Overlay

(Please Note- you will not see the LDSR folders if you are running Studio Professional).

In the following example- you will see THREE folders (ignore the folder ending in _old for the time being)

LDSRClient15 (SDL Trados Studio 2019)

LDSRClient15_old

LDSRClient5 (SDL Trados Studio 2017)

Click (highlight) the required version...

15 = SDL Trados Studio 2019

5= SDL Trados Studio 2017

Right Click and rename

Just add _old (and then press Enter)- the entry should now look as follows.

You can now close the Registry and restart Studio you will be required to set up Studio as though this was a first install

If you return to the registry settings, please note you will now have TWO entries for the same version

The folder with the extension _old...is the disabled folder (and can be deleted if Studio has started without any problems)

LDSRClient15 is now the newly applied folder for the new language settings.

How to: Change the Installed languages (Freelance versions only)

Oana Nagy — Tue, 21 Jan 2020 12:29:28 GMT

Revision 1 posted to Customer Experience by Oana Nagy on 1/21/2020 12:29:28 PM

SDL Studio Freelance allows you to select 5 languages when installing the application.

Once you have completed the installation of SDL Trados Studio, there are no 'out of the box' solutions to enable you to change the installed languages.

The only way to do this, (admin rights are required) is to access the Windows Registry

WARNING-

The following instructions require that you access and edit the Windows registry!

Do not continue if...

...you feel comfortable accessing and editing registry entries. Errors/mistakes when editing the registry can have serious/irreversible consequences

How to edit the Registry (Windows 8/10 machines only- Windows 7 is no longer supported)

1) Click on the Windows icon and simply start typing REGEDIT (Admin rights are required)

2) Now click on the Registry Editor

3) when prompted, click YES to-

You are now accessing the Windows Registry. The folder structure will appear as follows.

Now select the HKEY_CURRENT_USER and Software folder

Now click on the Software folder and scroll down to MicroSoft and Language Overlay

(Please Note- you will not see the LDSR folders if you are running Studio Professional).

In the following example- you will see THREE folders (ignore the folder ending in _old for the time being)

LDSRClient15 (SDL Trados Studio 2019)

LDSRClient15_old

LDSRClient5 (SDL Trados Studio 2017)

Click (highlight) the required version...

15 = SDL Trados Studio 2019

5= SDL Trados Studio 2017

Right Click and rename

Just add _old (and then press Enter)- the entry should now look as follows.

You can now close the Registry and restart Studio you will be required to set up Studio as though this was a first install

If you return to the registry settings, please note you will now have TWO entries for the same version

The folder with the extension _old...is the disabled folder (and can be deleted if Studio has started without any problems)

LDSRClient15 is now the newly applied folder for the new language settings.