Studio shut down but process running in the background

I shut down Studio 10 minutes ago, but the process is still running in the background. The process is using 13% of my CPU, which means it has been hogging one of my 8 threads for 10 minutes, i.e. as much CPU power as as single-thread process can get.

I have mentioned this before, but no one from SDL has commented on it. It looks like another Studio bug.

I am going to kill the process now, as I cannot move the files for the project until the process terminates.

I would, however, like to know whether it is safe to kill the process. I have repaired Studio after killing the process like this in the past. Is a repair necessary, or can I continue using Studio without a repair?

I am running Studio 2017, with the latest updates applied.

Regards,

Bruce Campbell
ASAP Language Services

Translate

Rate translation

Suggest better translation

Moderator UI

Thread Subject & Description
Studio shut down but process running in the background I shut down Studio 10 minutes ago, but the process is still running in the background. The process is using 13% of my CPU, which means it has been hogging one of my 8 threads for 10 minutes, i.e. as much CPU power as as single-thread process can get. I have mentioned this before, but no one from SDL has commented on it. It looks like another Studio bug. I am going to kill the process now, as I cannot move the files for the project until the process terminates. I would, however, like to know whether it is safe to kill the process. I have repaired Studio after killing the process like this in the past. Is a repair necessary, or can I continue using Studio without a repair? I am running Studio 2017, with the latest updates applied. Regards, Bruce Campbell ASAP Language Services
Get AI Suggestion

AI Reply

Accept answer Reject Answer

Parents

0 Paul over 8 years ago

Hi Bruce,

I don't think this is a common bug and I have no idea what is causing this problem for you. I guess you'll only know if a repair is necessary after you try it!

Rarely I kill Studio, the same as I kill any other application that from time to time causes me a problem like this.

Did you run a batch task or some process that is perhaps unfinished?

Regards

Paul

Paul Filkin | RWS Group

________________________
Design your own training!
You've done the courses and still need to go a little further, or still not clear?
Tell us what you need in our Community Solutions Hub
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate
0 Bruce Campbell over 8 years ago in reply to Paul

Hi Paul,

It may happen more than you think. I generally don't notice it unless I want to move the Studio files for a project. The Studio process keeps them locked until it terminates. I end up killing the process if I lose my patience.

Watch the Studio process in the Task Manager the next time you shut down Studio. The window closes immediately, but on my previous computer running windows 7 and Studio 2015 or 2017, the Studio process continued in the background. Sometimes for a short period of time, sometimes for a long period of time. The same thing happens on my new computer running windows 10.

Dragon also sometimes appears to have trouble when Studio hangs like this. (Studio hangs regardless of whether Dragon is running.)

Best regards,
Bruce Campbell
ASAP Language Services
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate
0 Paul over 8 years ago in reply to Bruce Campbell

Hi Bruce,

Interesting stuff you come out with Bruce... I've never come across this particular issue. I must live a sheltered life ;-) However, I tested it just now by removing all my projects, closing Studio and restarting. No errors... just have to add them all back again and foolishly forgot to backup my projects.xml first!!

Regards

Paul

Paul Filkin | RWS Group

________________________
Design your own training!
You've done the courses and still need to go a little further, or still not clear?
Tell us what you need in our Community Solutions Hub
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Reject Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate
0 Jesse Good over 8 years ago in reply to Bruce Campbell

Hi Bruce,

> It instead displays an error message
Could you post a screenshot?
Im curious as to the error message.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate
0 Bruce Campbell over 8 years ago in reply to Paul

Hi Paul,

As I mentioned, it is "frequently" a problem. And I am not the first person to mention this problem in the Studio forums.

But in the grand scheme of things it is just an inconvenience ...

Studio continuing to run in the background is also an inconvenience. And I have also mentioned this before in Studio forums. Again, the process does not *always* continue running for a long period of time in the background. It does so frequently enough to be an inconvenience.

But I am not pushing anyone for an answer.

I just thought I would ask whether anyone knows what it is doing when it hangs in the background like this and whether killing the process is likely to scramble any files.

If no one has noticed this behavior, then I will just continue killing and repairing when I have to move project files and the Studio process is taking too long to terminate.

Thank you for your comments :-)
Bruce Campbell
ASAP Language Services
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate
0 Bruce Campbell over 8 years ago in reply to Paul

Hi Paul,

I guess you do live a sheltered life (at least as far as this bug is concerned).

After your previous comments, I assumed the Studio bug had finally been fixed and started closing projects in Studio again (removing them from the list of projects) instead of closing Studio and then moving the files.

When the last project is removed from the project list and I try to close Studio, I *frequently* see the following message:

By the way, I am not the only user to mention this problem in the forums.

It is not a serious problem, since I know what to do when it happens, but it is an inconvenience and has caused problems for other users.

Regards,
Bruce Campbell
ASAP Language Services
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate
0 Paul over 8 years ago in reply to Bruce Campbell

Thanks for the screenshot Bruce. I note you have customised your view here. What happens if you reset the windows layout instead of whatever else you do? And if you reset the windows layout and then repeat the exercise do you still have a problem?

Regards

Paul

Paul Filkin | RWS Group

________________________
Design your own training!
You've done the courses and still need to go a little further, or still not clear?
Tell us what you need in our Community Solutions Hub
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Reject Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate
0 Bruce Campbell over 8 years ago in reply to Paul

Hi Paul,

Good question. I opened up Studio again, but of course it is now closing without any error message when there are no projects in the project list.

If this happens again, I can try resetting Studio back to its original settings.

Can I do this by moving or renaming the files located at "C:\Users\asaplang\AppData\Roaming\SDL\SDL Trados Studio\14.0.0.0"? (I see 4 xml files there.) Do these files contain all of the Studio settings?

If I rename the default project template, will Studio copy the original default template from "C:\Users\asaplang\AppData\Roaming\SDL\SDL Trados Studio\14.0.0.0\UserProfiles\Builtin"? (This appears to be a Studio stash of the original project templates.)

Thanks!
Bruce Campbell
ASAP Language Services
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate
0 Paul over 8 years ago in reply to Bruce Campbell

I meant just use View -> Reset Window Layout.

Paul Filkin | RWS Group

________________________
Design your own training!
You've done the courses and still need to go a little further, or still not clear?
Tell us what you need in our Community Solutions Hub
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate
0 Bruce Campbell over 8 years ago in reply to Paul

I will try it next time.

I was actually thinking about another problem I have been having (i.e. the amazing disappearing Symbols section of the Advanced ribbon), but I never got around to asking you how to temporarily reset Studio's settings before.

Would saving those 4 xml files and the default project template reset Studio to its default settings? Or is it more complicated?

Best regards,
Bruce Campbell
ASAP Language Services
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate
0 Paul over 8 years ago in reply to Bruce Campbell

Hi Bruce,

These are two different things.

Unknown said:
Would saving those 4 xml files

Here you are referring to renaming the 14.0.0.0 folder to reset Studio:

c:\Users\[USERNAME]\AppData\Roaming\SDL\SDL Trados Studio\14.0.0.0

Unknown said:
the default project template

To reset these you need to rename either the folder here:

c:\Users\[USERNAME]\Documents\Studio 2017\Project Templates\

Or rename individual templates if you don't wish to reset them all.

When you restart Studio the xml files will be recreated as default and the project templates will be recreated from the location you mention.

Regards

Paul

Paul Filkin | RWS Group

________________________
Design your own training!
You've done the courses and still need to go a little further, or still not clear?
Tell us what you need in our Community Solutions Hub
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Reject Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate
0 Bruce Campbell over 8 years ago in reply to Paul

Hi Paul,

Studio once again displayed an error message when I tried to exit the program with an empty project list.

I reset the window layout as you suggested (View -> Reset Window Layout), but Studio continues to display the same error message and refuses to close.

This is, however, just a side issue. The original question was why Studio continues to run in the background when the Studio window is closed.

Could you do me a favour Paul, to satisfy my curiosity? Could you start the Task Manager and Studio, open up a project, preferably something large if you have it, and then watch to see whether the Studio process terminates when you close the Studio window?

The incident that inspired my original question was quite extreme. It looked like the Studio process was stuck in a loop and would not terminate, even though the window closed right away. Normally the process terminates quickly when the window is closed. If not, it generally terminates within a minute or two.

Then we can put this thread to bed.

Best regards,
Bruce
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate

Reply

0 Bruce Campbell over 8 years ago in reply to Paul

Hi Paul,

Studio once again displayed an error message when I tried to exit the program with an empty project list.

I reset the window layout as you suggested (View -> Reset Window Layout), but Studio continues to display the same error message and refuses to close.

This is, however, just a side issue. The original question was why Studio continues to run in the background when the Studio window is closed.

Could you do me a favour Paul, to satisfy my curiosity? Could you start the Task Manager and Studio, open up a project, preferably something large if you have it, and then watch to see whether the Studio process terminates when you close the Studio window?

The incident that inspired my original question was quite extreme. It looked like the Studio process was stuck in a loop and would not terminate, even though the window closed right away. Normally the process terminates quickly when the window is closed. If not, it generally terminates within a minute or two.

Then we can put this thread to bed.

Best regards,
Bruce
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate

Children

0 Jesse Good over 8 years ago in reply to Bruce Campbell

Hi Bruce,

Just my 2 cents here, but from what it looks like, these problems are being triggered by a certain sequence of operations.
From what it looks like, the issue is with the "Projects" view only and this happens when closing down.
As a workaround, here is what I would do:

Every time right before you close Studio, I would click on the "Welcome" view (or maybe a few of the others) and then click back to another view.
This should ensure Studio does not try to reference an old view again and perhaps let Studio close down properly?

Let me know if that helps.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate
0 Bruce Campbell over 8 years ago in reply to Jesse Good

Thanks Jesse,

I will give it a try next time!

Best regards,
Bruce
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Share
Documentation Survey: help us offer you better documentation! Translate

Trados Studio > 1. Trados Studio

Studio shut down but process running in the background